K-80
PRIMER BIL 20/85
How to use:
Clean and dry the surfaces to be treated, if necessary. Use a brush or a roller to apply or spray with one layer of Bitumen solution K-80. The surface must be completely dry before it is treated further. Consumption 0.2…0.4 l/m2. Stains and tools are cleaned up mechanically, using white spirit or mineral turpentine.
PLEASE NOTE: Do not apply to a hot surface, mix with hot bitumen or brush the coated surface with hot bitumen immediately after the application.
Properties:
Drying time around 2-3 hours at + 20 °C, depending on the thickness of the layers. In cold, damp conditions, the drying time may be many times longer.
Storing:
In a dry place protected against sunlight and heat.
Instructions for environmental protection:
Empty package and a dried product can be taken to a landfill. Waste including fresh product is hazardous waste, which needs to be disposed of in accordance with waste management legislation and instructions from the environmental authorities.
| EAN | Litres / package | Kg / package | packages / pallet |
|---|---|---|---|
| 6417443508088 | 200 | 180 | 4 |
| 6417443508071 | 20 | 18 | 36 |
| 6417443508064 | 10 | 9 | 60 |
| 6417443508033 | 3 | 2.7 | 150 |
|
||||||||
|
||||||||
|
||||||||
|
Use: Primer for concrete, plaster, metal, felt and similar surfaces used before applying hot bitumen, Katepal Bitumen solution K-70 or Roof Coating K-50. Primer for concrete before applying bitumen felt. For outdoor use only.
Application: Brush, roll or spray
Consumption: 0,2 - 0,4 l /m3 / m2
Thinner and cleaning of equipment: white spirit or mineral turpentine
